Apply OSKARS M-100 BUFFING and POLISHING COMPOUND with a special sponge on a surface of 50 x 50 cm ( 2-3 sqft) and rub in polishing until all sanding marks and scratches are removed and a smooth surface is obtained. Repeat the process if necessary.
As soon as OSKARS M-100 BUFFING and POLISHING COMPOUND dries on the surface, increase the contact pressure - in this way you will achieve a special high gloss. We recommend OSKARS lambskin POLISHING PAD type 880 A. As OSKARS M-100 BUFFING and POLISHING COMPOUND also withstand high temperatures, you can work with high contact pressure.
Recommended machine speed: 1800-2100 rpm.
IMPORTANT: CLEAN AND REMOVE RESIDUES FROM THE POLISHING PAD REGULARLY.
Prerequisite: a well pre-treated base, e.g. with OSKARS M-50 HEAV DUTY BUFFING and POLISHING COMPOUND, to remove larger scratches.
Further treatment: Refinish with OSKARS M-150 SUPER FINISH POLISHING COMPOUND creates the desired high gloss finish.
Final treatment: To remove residues and give the surface a temporary carnauba wax protection, apply OSKARS M-500 LIQUID MOULD RELEASE WAX.