OSKARS M-150 Super Finish Polishing Compound
OSKARS M-150 SUPER FINISH POLISHING COMPOUND enables excellent polishing during hand and high temperature machine processing. OSKARS M-150 SUPER FINISH POLISHING COMPOUND has been specially developed for polishing polyurethane varnishes, gelcoat surfaces as well as epoxy resin surfaces to achieve a super fine finish. It is particularly suitable for CFRP preparation / CFRP care and FRP preparation / FRP care.
OSKARS M-150 SUPER FINISH POLISHING COMPOUND is also very well suited for the after-treatment of finished parts to remove colour haze, dull spots, etc.
OSKARS M-150 SUPER FINISH POLISHING COMPOUND contains extremely fine, extremely evenly sorted abrasive particles.
It has an extremely fine removing effect and thus enables a fine high gloss.
A well pre-treated base is requested, e.g. with
OSKARS M-100 BUFFING and POLISHING COMPOUND to remove larger scratches.
- Without harmful additives for gelcoat surfaces or epoxy resin surfaces
- Wax-free and silicone-free
- Suitable for machine application at higher temperatures
- White coloured
Apply OSKARS M-150 SUPER FINISH POLISHING COMPOUND with clean, soft cloth on an area of 50 x 50 cm (2-3 sqft) and rub with polishing until sanding marks and scratches are removed. Repeat the process if necessary.
As soon as OSKARS M-150 SUPER FINISH POLISHING COMPOUND dries on the surface, increase the contact pressure to create a high gloss. The best effect is achieved by using OSKARS lambskin POLISHING PAD type 880A. As OSKARS M-150 SUPER FINISH POLISHING COMPOUND has been developed for high temperature machine processing, high contact pressure can be used.
Recommended machine speed: 1800 - 2100 rpm.
IMPORTANT: ONLY USE CLEAN POLISHING PAD AND CLEAN AND REMOVE RESIDUES REGULARLY.
Prerequisite: a well-pretreated base, e.g. with OSKARS M-100 BUFFING and POLISHING COMPOUND to remove larger scratches.
Final treatment: To remove residues and give the surface a temporary carnauba wax protection, apply OSKARS M-500 LIQUID MOULD RELEASE WAX.