M-610 SP
OSKARS M-610 SP Release Agent and Sealing Agent
OSKARS M-610 SP RELEASE AGENT and SEALING AGENT for model making and mould making for surface sealing of synthetic resin moulds, FRP moulds and metal moulds.
OSKARS M-610 SP RELEASE AGENT and SEALING AGENT is best suited for processing polyester, acrylic, vinyl ester, epoxy resin, DCPD resin – especially for hand laminate, fibre spraying, cold wet pressing, vacuum injection, RTM, SMC and for moulds with high surface porosity.
- Free of chlorofluorocarbon, chlorinated, aromatic or toxic solvents
- Wax-free and without PVA
- Surface gloss for all models and for new resin and metal moulds
- Eliminates porosity problems
The application of OSKARS M-610 SP RELEASE AGENT and SEALING AGENT creates a perfect primer for subsequent use with OSKARS SP-620 RELEASE AGENT.
Usage
Apply OSKARS M-610 SP RELEASE AGENT and SEALING AGENT with a lint-free cotton cloth on the cleaned mould surface.
After a short contact time, polish to a high gloss with a clean cloth under light pressure without leaving streaks.
After polishing, a curing time of at least 15 minutes is recommended.
New moulds require an application of 6-7 coats. Each coat should be carefully polished. After applying the last coat, a curing time of at least 3 hours is recommended.
Dirty surfaces must be cleaned with a suitable mould cleaner before use. We recommend OSKARS M-600 SP MOULD CLEANER
It is also recommended to apply a coat of OSKARS M-620 RELEASE AGENT between the first 3-4 demouldings.