Usage

01

Apply OSKARS M-50 HEAVY DUTY BUFFING and POLISHING COMPOUND - with clean, soft cloth on an area of 50 x 50 cm (2- 3 sqft) and rub in a polishing manner, until sanding marks and scratches are removed. Repeat the process if necessary.

02

As soon as OSKARS M-50 HEAVY DUTY BUFFING and POLISHING COMPOUND - dries on the surface, increase the contact pressure to produce a high gloss. The best effect is achieved by using OSKARS lambskin GRINDING PAD type 880A. As OSKARS M-50 HEAVY DUTY BUFFING and POLISHING COMPOUND is designed for high temperature machine processing, high contact pressure can be used.
Recommended speed: 1800-2100 rpm.

IMPORTANT: CLEAN AND REMOVE RESIDUES FROM THE POLISHING PAD REGULARLY.

03

Further treatment: Refinish with OSKARS M-100 BUFFYING and POLISHING COMPOUND or OSKARS M-150 SUPER FINISH POLISHING COMPOUND, creates the desired high gloss finish.

Final treatment: To remove residues and give the surface a temporary carnauba wax protection, apply OSKARS M-500 LIQUID MOULD RELEASE WAX.

Download

Storage and safety information

Downloads technical data sheets
Instructions for using OSKAR'S polishing pastes, emulsions, car and boat polishes and accessories can be found in the technical data sheets. These are available for you to download here.

Perfection for moUlds and finished parts

OSKARS M-products stand for the highest quality for processing, preparation and
care of moulds and surfaces in the manufacture of CFRP and FRP products.

OSKARS M-products are used particularly in the construction of automobiles,
boats and wind turbines.

OSKARS M-products convince by their easy, efficient and reliable application
for outstanding results.

The use of OSKARS M-products always realises a cost-effective production.